Electrician Resume Template

Free electrician resume template for Word and Google Docs. License class, state and safety cards sit under the summary; apprenticeship hours go in education.

Download for Word (.docx)Open in Google Docs

Free, no signup. Want it filled in first? Download the electrician example as Word.

What is in the file

[Your Name]

[Journeyman, Master or Apprentice Electrician] · [State] License · [Commercial, residential, industrial or service]

[City, State] · [email@example.com] · [(555) 555-0100] · [LinkedIn or portfolio URL]

Summary

[Licensed (class) electrician with N years in (commercial, residential, industrial, maintenance) work. Largest job: (size and type, e.g. a 40,000 sq ft medical office or a 1,200-amp service). Known on crews for (one thing a foreman would name, e.g. clean pipe runs that pass the first inspection).]

Licenses and Safety Certifications

[Journeyman or Master] Electrician License, [State], [Year] · [Reciprocity states, if any]

[OSHA 10 or OSHA 30 Construction], [YYYY]

[NFPA 70E arc flash, aerial lift, confined space, first aid], [YYYY]

[Specialty: fire alarm (NICET), solar (NABCEP), low voltage, PLC course], [Issuer], [YYYY]

Experience

[Journeyman Electrician, Foreman or Maintenance Electrician], [Contractor or facility]

[City, State] · [Mon YYYY] – [Present]

  • [Installed (service, distribution, lighting controls, fire alarm, motor controls) on (job type and size), from (layout or rough-in) to (trim and termination)]
  • [Inspections: (N jobs or all of them) passed on the first visit, or code problems you caught before the inspector did]
  • [Crew: led (N) apprentices or electricians, laid out work from (plans, one-lines, schematics), coordinated with (GC, other trades, inspectors)]
  • [Safety or troubleshooting: (years without a recordable injury, LOTO program, toolbox talks) or (downtime cut from X to Y)]

[Apprentice Electrician or previous role], [Contractor or shop]

[City, State] · [Mon YYYY] – [Mon YYYY]

  • [Work types you rotated through: (residential, commercial, service, industrial) and roughly how your hours split]
  • [Hands-on tasks: (EMT, rigid or PVC bending), (wire pulls), (panel terminations), (service calls)]
  • [Something you were trusted with alone: (service calls, punch lists, as-built drawings, ordering material)]

Skills

  • Installation: [Conduit bending, service upgrades, panels and distribution, lighting, EV chargers, generators]
  • Controls and troubleshooting: [Motor controls, VFDs, PLC basics, multimeters, insulation testing, fault finding]
  • Code and plans: [NEC (edition), local amendments, blueprints, one-line diagrams, load calculations]

Education

[Apprenticeship: JATC, IEC, ABC or contractor program], [N] on-the-job hours and [N] classroom hours, [YYYY]

[High school diploma, GED or technical college certificate], [School], [YYYY]

An electrical contractor or plant maintenance supervisor sorts electrician applicants by license before anything else: journeyman, master or apprentice, which state, and whether it carries over. The next question is the kind of work you have done, since a residential service tech and an industrial controls electrician are hired for different jobs. This template answers both near the top. The headline names your license and work type, and a Licenses and Safety Certifications section follows the summary with the license, OSHA card, arc flash training and any specialty credentials.

Experience comes after, with bullet slots for job size, systems installed, inspections and crew. Skills are grouped as installation, controls and code so a foreman can match them to the work being bid. Education closes the page and holds the apprenticeship program with its hours, which is where contractors look to see how you earned the license.

Fill in each bracket; cut what you have not done. Owners often read these on a phone at a job site, so keep every line short. See the electrician resume example for a journeyman's version, filled in.

Updated .

How to fill in each section

  1. Summary: license, work type, biggest job

    Three sentences, each with one job. The first gives your license class and the kind of work, the second the largest or most complex project you have been on, with its size, and the third how a foreman would describe you on a crew. Electricians moving between commercial and industrial work should rewrite the second sentence for each employer, since a plant manager wants to see motors and controls, not tenant fit-outs.

  2. Licenses and Safety Certifications: right after the summary

    Contractors cannot put an unlicensed worker on certain tasks, and general contractors and insurers often require proof of safety training on site. So this block follows the summary, where it reads as a qualification rather than an afterthought. Write the license as your state issues it, and add the number only if the posting asks. Note reciprocity if your license transfers. OSHA and arc flash cards come next; add specialty credentials only when they fit the work you want.

  3. Experience: job size, systems, inspections

    Each bullet slot names a system and a measure. Square footage, amperage, unit counts, circuits and plant equipment tell an owner the scale you are comfortable at. First-time inspections are the result contractors care about most, because a failed one costs them days. Crew lines should say how many people you ran and whether you laid out the work from plans yourself. Maintenance electricians can swap installation for uptime and troubleshooting results.

  4. Skills: install, control, code

    Three groups let a foreman scan for the jobs they bid. Installation covers what you can build, controls covers what you can diagnose, and code covers what you can read and calculate. Name the NEC edition you have worked to, because states adopt editions at different times. Leave out basic hand tools; list a specialty instrument only when it signals a skill, such as a megohmmeter for insulation testing.

  5. Education: apprenticeship hours belong here

    The apprenticeship is your education as an electrician, so it takes the first line, with the program name and the on-the-job and classroom hours. Union and open-shop programs are both worth naming. A high school diploma or technical college certificate goes on the second line. Pre-apprenticeship training is worth listing only while you are still an apprentice; drop it once you hold a journeyman card.

Next steps

See it filled in

The electrician resume example uses this structure with a realistic candidate, with versions for entry, mid and senior level.

Read the electrician resume example

Or build it online

Start from the same content in the ATS-Optimized design, tailor it to a posting and export a PDF. Free to start.

Open it in Resume Master

Questions about the electrician resume template

Should I put my electrical license number on my resume?

Include it when the posting asks or when you apply to contractors who verify licenses before calling. Otherwise the class and state are enough, and you can give the number on the application form. Keep the renewal year current either way.

How do I list licenses and work in more than one state?

Give each license its own line in the certifications block with its state. In experience, the meta line shows where each job was. If you travel for work, a short phrase in the summary such as *open to travel for project work* tells a contractor you will go where the job is.

Can I use this template to move from construction into maintenance?

Yes. Move troubleshooting, motor controls and PLC work to the first bullets, and recast installation results as equipment you can now diagnose. Plant hiring managers look for uptime and response time, so any service calls or warranty work you did belong near the top.

What should an apprentice put in the summary?

Your year in the program, the hours completed, the kinds of work you have rotated through, and the safety cards you hold. Finish with what you want next, such as more commercial hours. A journeyman reading it wants to know what you can do without being shown.

Is it free?

Yes. The Word files and the Google Docs copy are free to download, edit and use for any application. There is no signup and no email.

Will it read correctly in an applicant tracking system?

The layout is one column with standard headings and real text: no tables, text boxes, icons, columns or images, which are the parts parsers most often misread. Keep it that way as you edit.

Word or Google Docs?

Use whichever you edit in. The Word file opens in Microsoft Word, Pages and LibreOffice. The Google Docs link asks you to make a copy in your own Drive; the original stays blank for the next person. Send the posting the format it asks for, usually .docx or PDF.

Related resume templates

All roles

Every application goes out fitting the job.

Paste a posting, get a resume written for it in two minutes.

Tailor your resume — free

Free to start. No card. Same price on web, iOS and Android.